/*
   Temperature Alarm
*/
float sinVal;            
int toneVal;
unsigned long tepTimer ;    

void setup(){ 
    pinMode(8, OUTPUT);        
    pinMode(6, OUTPUT); // Kırmızı        
    pinMode(7, OUTPUT); // Yesil       
    Serial.begin(9600);        
}

void loop(){ 
    int val;               
    double data;          
    val=analogRead(0);  
    data = (double) val * (5/10.24);  // convert the voltage to temperture
     
    if(data>30){        // If the temperture is over 27 degree, buzzer will alarm.  
          for(int x=0; x<2; x++){
            sinVal = (sin(x*(3.1412/180)));
            toneVal = 2000+(int(sinVal*1000));
            tone(8, toneVal);
            delay(2);
        digitalWrite(6,HIGH);
        delay(1000);
        digitalWrite(6,LOW);
        delay(1000);
     }   
    } else {    // If the temperturn is below 27 degree, buzzer will not alarm  
           noTone(8);           
        digitalWrite(7,HIGH);
        delay(1000);
        digitalWrite(7,LOW);
        delay(1000);
    }
     
    if(millis() - tepTimer > 500){     // output the temperture value per 500ms
             tepTimer = millis();
             Serial.print("temperature: ");     
             Serial.print(data);              
             Serial.println("C");              
       } 
}